How to code "Dynamic Light Assist" for VW, Seat and Skoda? (Dynamic Light Assist Coding Instructions - From MY 2017)

What is Dynamic Light Assist ?

The Dynamic Light Assist provides optimum illumination of the road, providing greater safety in traffic.

This system with dynamic masking allows driving with high beam continuously without dazzling oncoming people. With the masking function, the high beam can be partially covered. Information about other vehicles in traffic and the level of illumination of the road is continuously measured by a camera located in the rear view mirror. Dynamic Light Assist, thereby significantly improving the overall illumination of the road.

Now you know what this system does. If you think you need this system, let's start coding.

Activate Dynamic Light Assist (DLA)

Let's code

Required:

  • VCDS or OBDEleven
  • A car built on the MQB Platform (Golf 7, Passat B8, Octavia A7, Leon 5F and more)
  • Led Headlights
  • A5 - Front Sensor Control Module

Coding Manual:

1- Select Control Module "A5 - Front Sensor" Enter security access: "20103" and Go to Long Coding

  • Find byte 19 - Bit 0-3 Value 00
  • Find byte 19 - Bit 4-7 Value 30
  • Find byte 21. Change it to hex value 40

2- Select Control Module "09 - Central Elec." Enter security access: "31347" and Go to Adaptation

  • If you are coding with OBDEleven, Find "Fernlicht_Assistent" and go into that menu. No need to this if you're coding with VCDS.
  • Find and Change "Erweiterte Fernlichtsteuerung" to "AFS FLA Fernlicht (GLW:MDF)"
  • Find and Change "Menusteuerung Fernlichtassistent" to "Present"
  • Find and Change "Menusteuerung Fernlichtassistent Worksteinstellung" to "Present"

After doing all this, the "DLA" option should have appeared in the "Light" menu in the vehicle settings. Check it.

3- Select Control Module "Module 4B - Multifunction Module" Enter security access: "20103" or "20113" and Go to Long Coding

Find Byte 9 - Change the hex value to 10.
Find Byte 10 - Bit 6 Enable. (Make sure bit 5 is unticked)
Find Byte 11 - Bit 2 Enable.

That is all. If you did it completely, you should have an option in the in the "Car Settings".

CLICK ON THE LINK TO GET DISCOUNTED OBDELEVEN:
https://www.obdeleven.com?aff=86

FOLLOW US ON INSTAGRAM:
https://instagram.com/garagemaslakcoding

FOLLOW US ON YouTube:
https://www.youtube.com/c/GarageMaslakCodingGizli%C3%96zellikA%C3%A7ma/featured

Leave your comment
Comments
12/16/2023 11:23 PM
Hi. I have tried this coding. Unfortunately an error occured "dynamic lights malfunction". I've also lost original settings, eg. dyyamic curves  lights in LED TOP. Any updates? VW Touran 2020 2.0 TDI Highline.
Regards.
1/24/2024 4:19 AM
Thanks for magnificent info. What trips can you recommend in 2024? Astro tourism, eco diving, home swapping, train stations are the new food destinations,sports tourism, coolcationing, gig tripping, private group travel?
2/14/2024 5:28 PM
I’m not sure where you’re getting your info, but great topic. I needs to spend some time learning more or understanding more.
Thanks for excellent information I was looking for this information for my mission.
2/21/2024 1:18 AM
👍👍👍 Super. DLA is aktiv.
5/22/2024 7:35 PM
Thanks for excellent info I was looking for this information for my mission.